Loading... Please wait...

FOLLOW US!

facebook.png twitter.png youtube.png youtube.png

Categories

Our Newsletter



5offtotal.jpg

THINK VAPE FINDER 250W TC BOX MOD WITH DNA250 CHIP W/O BATTERY

  • Image 1
Price:
$209.99
SKU:
THINK VAPE FINDER 250W TC BOX MOD WITH DNA250 CHIP W/O BATTERY
Weight:
1.00 LBS
Quantity:
Bookmark and Share


Product Description

Think Vape Finder 250 is a new powerful vaping gear after Finder 167. Though the two Finder MODs adopt the same Evolv DNA 250 chip, only the Finder 250 can reach up to 250w output power with three 18650 cells (not included). It directly measures and limits the temperature of the heating coil during operation. The Finder also allows you to save and select between eight groups of output settings. 3 colors for your selection.

 *It doesn't include any 18650 battery cell. Please use cells with discharge current above 25A.

Parameters

Size: 40 x 89 x 49mm

Chip: Evolv DNA 250 chip

Power range: 5W to 250W

Temperature range: 100°C to 300°C or 200°F to 600°F

Battery: Three 18650 batteries (not included)

Charging: 2A Micro USB charging

Material: Zinc Alloy, Carbon Fiber, Genuine Leather, SS connector & abalone shell, toughened glass

 

It comes with

1x Think Vape Finder 250W Mod

1x USB Cable

1x English Manual

Features

Powered by DNA 250 Chip

Firmware upgradeable

Fast 2A Micro USB charging

Fully customize with Escribe software

Various safety protections

510 stainless steel threaded

How to Use

Locked mode: Pressing the fire button 5 times with less than 7 seconds will cause the device to enter Locked mode. To exit locked mode, press the fire button 5 times.

Stealth mode: While locked, holding the fire and the down buttons simultaneously for 5 seconds will switch to stealth mode. In this mode the display is off. It will still show error and lock message. To switch back to normal display mode, hold down the fire and the down buttons simultaneously for 5 seconds.

Power locked mode: While unlocked, holding down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change the power setting. To exit Power Locked mode, hold the up and down buttons for two seconds.

Resistance lock: While locked, holding both the fire and up buttons for two seconds to enter Resistance Lock mode. To disable resistance lock, repeat the procedure to unlock it.

Shift between VW/TC modes: Pressing the fire button 5 times, the device will directly enter VW mode. You can adjust the output wattage from 5W to 167W by pressing up or down button. In this mode, holding both the up and down buttons simultaneously for two seconds will enter TC mode. In TC mode, you can adjust temperature from 200F to 600F or 100C to 300C. Press the fire button or leave the display for 10 seconds on current setting to confirm and exit the TC mode. Then Pressing the fire button 5 times, the device will enter VW mode again.

Charging: You can take out the lithium-batteries from the device and then charge the cells. Moreover, it can also be charged via USB cable.

 

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency Converter

Choose a currency below to display product prices in the selected currency.

Canada CANADIAN

Add to Wish List

Click the button below to add the THINK VAPE FINDER 250W TC BOX MOD WITH DNA250 CHIP W/O BATTERY to your wish list.

You Recently Viewed...




​ ​