How to fill E-liquid(Atomized e-liquid)
You can get how
to use Atomized e-liquid/e-juice from here: how to fill e-liquid/e-juice to
the cartridge, atomizer, cartomizer or clearomizer, ect.
E-liuid (or E-Juice) is the liquid that is used to vaporize. E-liquid typically contains
Vegetable Glycerin, Propylene Glycol, Nicotine and Flavoring. The user can
generally custom order e-liquid by requesting a certain VG (Vegetable
Glycerin) percentage and PG (Propylene Glycol) percentage. The user can also
request a certain nicotine strength(density). Nicotine isn’t required to be
in e-liquid in order to vaporize it. The common nicotine strengths are from
0mg to 36mg.
How to fill E-liquid(Atomized
e-liquid): (no need use
the injector)
*step1: take out the bottle lid
*step2: cut off the top of bottle
*step3: drop the 2-3 drops of E-liquid to the atomizer or refill in the
cartridge
do not drop too much e-liquid to the atomizer, otherwise it will leake
into the battery and kill your battery)
*step4: then cover the bottle lid
the e-liquid to the e-cigarette atomizer:
directly drop 2-3 drops e-liquid to the e-cigarette e-liquid, the
atomizer will produce heavy vapor.
Refill e-liquid in the blank/old cartridges:
1). Draw the E-liquid inside the Injector.
2). Inject from the bottom until the E-liquid comes up to top.
3). Put the syringe into the bottom of the blank cartridge, and fill
the e-liquid.
Fill/re-fill the e-liquid to the blank/empty/old cartomizer
cartridges:
One new blank/empty 103C/510/eGo cartomizer holds about 1ml
e-liquid, but we suggest you do not fill more 0.9ml e-cigarette
liquid one time, and if your old 510/ego cartomier still can work,
you can refill the e-liquid again too, for one old 510/eGo
cartomizer, please do not fill more 0.4ml one time.
a. Remove
the 103C/510/eGo cartomizer’s rubber cover
A
510/ego cartomizer is one piece cartridge and atomizer contained in
a single unit, for filling the e-cigarette e-liquid, you need to
remove the 510/eGo cartomizer’s rubber cover first.
b. Take
out the 103C/510/eGo cartomizer’s cover
After remove the 510/eGo cartomizer’s rubber cover, you can find
there has a plastic white cartomizer cover (not gold parts) on the
top of the cartomizer, take out it.
c. Take
out the 103C/510/eGo cartomizer’s rubber washer
After take off the cartomizer’s cover, you still need to take out
the rubber washer.
d. Fill
the e-cigarette liquid to the 103C/510/eGo cartomizer
Now, you can draw the E-liquid inside the syringe, put the syringe
into the side(notice: not the center) of the 103C/510/eGo
cartomizer.
e. Re-put
the parts into the 103C/510/eGo cartomizer
Reput the rubber washer to the filled 103C/510/eGo cartomizer, the
plastic cartomizer cover, the new filled 103C/510/eGo cartromizer is
finished now.
—4. Fill
the e-liuid to the e-cigarette eGo-T/801-T/901-T/510-T/BE112-T tank
cartridge.
a.
Uncover the e-cigarette blank tank Cartridge:
Step 1: Cut the plastic package;
Step 2: Remove the e-cigarette tank cartridge rubber cover;
Step 3: Take off the tank cartridge plastic cover.
c. Fill
the e-liuid to the e-cigarette tank system cartridge:
Step 1: Take out the e-liquid bottle lid;
Step 2: cut off the top of bottle of e-liquid;
Step 3: Drip the e-liquid to the e-cigarette tank cartridge until
full;
Step 4: Cover the cartridge plastic cover again.
—5. Fill
the e-liuid to the pen style e-cigarette eGo-W F1 (clearotimzer/
transparent/ atomizer/ CE3 Giantomizer).
Step 1: Take out the bottle lid;
Step 2: Cut off the top of bottle;
Step 3: Put the syringe needle into the bottle or draw the E-liquid
inside the Injector.
Step 4: Fill the e-liquid to the eGo-W F1 clear cartomizer.
—6. Fill
the e-liuid to the e-cigarette eGo CE4/CE5/CE6, E-Smart,
etc, Clearomizer/Cartomizers.
Step 1:
Unscrew the inhaler tip from the CE4/CE5 cartomizer
.
Step 2:
.Using an e-liquid bottle or syringe, fill the CE4/CE5 cartomizer by
inserting e-liquid down the side wall (Do not fill e-liquid in the
center hole, that is for air flow).
—7. Fill
the e-liuid to the e-cigarette Mini protank, H2, E-Smart BCC, etc,
BCC or BDC Clearomizer/Cartomizer.
Step
1:Unscrew the bottom base from the tank.
.
Step 2:
Fill the e-liquid to the tank tube.
Using an eliquid bottle or syringe, fill the tank tube by inserting
e-liquid down the side wall (Do
not fill e-liquid in the center hole, that is for air flow).
Step 3:
Screw the bottom base back into the tank tube again.
* Tips:
the protank coil head may be loosed with the bottom base, if so,
please re-screw it in the bottom base again.
—8. Fill
the e-liuid to the MEGA Clearomizer/Cartomizer (same as: Aerotank
MEGA, Nautilus ect) .
1: Check
to make sure each parts of Aerotank MEGA Tank be screwed tightly
each other.
2:
Screw the Airflow Adjustemnt Base off the tank.
(Tips: the Coil Head may be loosed with the Bottom Base, if so,
please re-screw it again)
3: Fill
E-liquid into the space between the Glass/Stainless Tube and the
center metal tube.
(DO NOT over fill or get e-liquid into the center shaft.)
4:
Screw the Airflow Adjustemnt Base onto the Aerotank MEGA Tank again.