Loading... Please wait...


facebook.png twitter.png youtube.png youtube.png

Site Updated



Our Newsletter

How to use eGo CE5/CE6

How to use eGo CE5/CE6 exchangeable & detachable vision clear caromizer (clearomizer) e-cigarette.

a. How to change the coil head on eGo CE5 (or CE6) cartomizer(Clearomizer):

Step 1: Unscrew the eGo CE5 (or CE6) cartomizer tube from eGo CE5/CE6 cartomizer base.

unscrew eGo CE5 cartomizer tube

Step 2: Unscrew the eGo CE5/CE6 cartomizer coil head from the top of the base assembly.

How to change the coil head on eGo CE5 cartomizer(Clearomizer)

Step3: Screw the new eGo CE5/CE6 cartomizer coil head into the CE5/CE6 cartomizer base again;

How to exchange the eGo CE5 cartomizer coil head

Step4: Screw the CE5 (or CE6) cartomizer tube back into the eGo CE5/CE6 cartomizer base.

eGo CE5 cartomizer base

b. How to fill e-liquid to the eGo CE5/CE6 cartomizer(clearomizer):

Step 1: Take out the e-liquid bottle lid;
Step 2: Cut off the top of bottle;
 e-liquid bottle

Step 3: Unscrew the CE5 (or CE6) cartomizer tip from the CE5 (or CE6) cartomizer tube.

eGo CE5 clear cartomizer tip

Step 4: Fill the e-liquid to the CE5 or (CE6) cartomizer.
Using an eliquid bottle or syringe, fill the CE5 (or CE6) cartomizer by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).

how to fill the e-liquid into the CE5 cartomizer

Step 5: Screw the eGo CE5 (or CE6) cartomizer tip back into the CE5 (or CE6) cartomizer tube(do not screw too tightly).

screw the eGo CE5 clearomizer mouthpiece tip

Tips: the cartomizer coil head may be loosed with the cartomizer base, if so, please re-screw it in the cartomizer base again.

C. How to enjoy your eGo CE5/CE6 e-cigarette:

Screw filled CE5 (or CE6) clear cartomizer with the eGo battery, then will be stand-by state.

How to enjoy the eGo CE5 e-cigarette

* The eGo-CE5/CE6 works only when you press the eGo battery LED button. Press the LED button and inhale at the same time.

d. How to charge the eGo CE5/CE6 battery:

You just screw the eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).

Charge the eGo-C battery